Chainsaw Hard To Pull? Here’s The Ultimate Solution!

Chainsaw hard to pull

Is your chainsaw hard to pull? Problems are easier to solve if they arise in a timely manner. One of the most difficult problems to deal with is the one that appears slowly and incrementally.

Signs that something is wrong with the chainsaw might be seen when a dislocated shoulder becomes a serious possibility while reaching for the starter cord.

We wonder if it’s because we’re getting older or if there’s something wrong with the starter cord. Decompression is an important part of chainsaw maintenance, so make sure it’s working before you begin any repairs. If it does, please make sure that it is operating.

You may find yourself relying on your chainsaw to perform a variety of odd jobs around the property. After strong storms, many individuals need to be able to trim fell tree limbs and other debris.

Even if you’re just trimming some trees or doing some landscaping work, it’s crucial to keep your chainsaw in good working order.

Related Article: How to fix a chainsaw – Easy fixes for common faults

As a result, chainsaw starting difficulties might be very discouraging. Troubleshooting will be necessary to figure out what’s going on. There could be a number of distinct causes. Find out what’s wrong with your chainsaw and how you can get it operating again by reading on.

Start with the Cylinder

Chainsaw Hard To Pull

Let’s begin with more difficult scenarios and work our way up. The bar and chain must be removed before you can begin. These two sections will be revisited at a later time.

The starter should be twitched when the spark plug is removed. The starter cord should be easy to pull, and there should be no fuel leaking out of the spark plug orifice.

There should be little resistance when the spark plug is withdrawn from the engine’s cylinder and piston, indicating that the bearings and cylinder are in good shape.

Exhaust system repairs are needed when it is unable to pull the cord even after the spark plug is replaced.

Chances are that the exhaust system has grown clogged and there is no place for the fumes to vent. Taking care of the exhaust channel should solve this issue.

There must be a thorough inspection of the exhaust port for carbon and other material deposits, which will need the removal of the muffler.

If you install instruments into the exhaust port, do it with caution. In order to prevent any foreign material from entering the cylinder, the piston must be placed in the correct position.

Related Article: Are Dereal chainsaws any good? – Here’s the lowdown

When carrying out this procedure, avoid using any sharp metal instrument that could harm the piston or the cylinder. It is possible to clean the muffler with a wire brush in order to remove any debris that has built up over time.

Reinstall the exhaust and the spark plug after cleaning. If you can, try to start the engine. Because there is no compression, this should be a breeze.

After that, reinstall the spark plug and give the starter cord one more go.. Give yourself a pat on the back if it’s simple enough and the only obstacle is the compression of the chainsaw.

The Starter Housing Is Damaged

Chainsaw Hard To Pull

The starter housing is the most prevalent problem that people have encountered. Things will get tangled up when you try to start your chainsaw if the starting housing is damaged.

Occasionally, the chainsaw won’t start because the rope won’t retract properly. This can make it nearly impossible to get the chainsaw to start. That doesn’t mean it’s any less annoying since it’s so commonplace.

It’s actually not that difficult to fix this problem, but you’ll need to replace the starter housing. A new starter housing system must be purchased and installed before the chainsaw will start properly.

If you’re still having problems, you can have the starter housing on your chainsaw replaced by a mechanic. Even if you have a warranty on your chainsaw, you may be able to get the repair covered.

Related Article: Are chainsaws allowed on airplanes?

Make sure to check if your chainsaw is covered by a warranty before making any decisions. It doesn’t matter if your chainsaw is out of warranty; you can still get replacement parts from nearby firms.

To the extent that you’re confident in your abilities, getting the proper components will enable you to complete this task on your own. Make a decision about your next steps depending on what you’re capable of.

The Pulley System Is Damaged

Chainsaw Hard To Pull

The pulley system, of course, is another potential issue with chainsaws. Your chainsaw’s pulley system can be destroyed by normal wear and tear or by something out of the ordinary.

Inspecting the chainsaw’s pulley system, you may discover that it isn’t operating as expected. This could be due to a misalignment of the spring and pawl, or even a poor connection between the two.

To get the pulley system working properly, you may need to change several parts. In certain cases, just tightening the pulley and ensuring that the attachment is properly secured might solve the problem.

Just look at the pulley system to see if you can figure out what is incorrect.

The best course of action is to replace any component that appears to be damaged. It’s possible to get this taken care of if your chainsaw is covered by a warranty, too.

You Might Just Need to Change the Rope

Sometimes the chainsaw’s sole problem is that the rope isn’t working properly. It’s possible that the rope is frayed, causing it to get trapped while you’re trying to pull it.

The problem can be fixed easily if this is the case, so don’t worry about it too much. To change the rope, you can just purchase a new one and follow the instructions.

In most cases, though, you’ll have to install a new starter assembly system. It’s not difficult, but you’ll have to do more than just swap out the old rope for the new one.

Make a point of thoroughly inspecting the rope to rule out any problems. Pulling the rope and seeing that it gets tangled in some way indicates that the rope may have a problem.

Starter Spring May Be Broken

The spring may be damaged or is not performing as it should be, so be sure to look into it. If your starting spring is broken, one won’t be able to get everything working properly.

An important part of the puzzle that’s well worth investigating if you’re having issues. Installing a new starter with a new starter spring is possible. In spite of the inconvenience, it may be worth the effort in the long run to have the starter spring replaced.

Related Article: The top 10 best rated chainsaws – Reviews and buyers guide!

The Chainsaw Is Old

Chainsaw Hard To Pull

Have you ever wondered how old your chainsaw is? While an old chainsaw isn’t necessarily a bad idea, it’s possible that a well-worn chainsaw will cause more troubles than a newer model.

Because of normal wear and tear, chainsaws that have been in regular use for a decade are more likely to have issues. If you’ve been using your chainsaw for a long time, it’s possible that it’s having trouble starting properly.

Even chainsaws can have difficulties starting if they’ve been sitting around for a while. You can and should make every effort to avoid problems like this, but it doesn’t mean that they won’t arise from time to time.

Chainsaws that have been exposed to moisture may rust, making it difficult to start the chainsaw.

Even if a chainsaw has a poor blade, it may not be able to be used any more. Check your chainsaw for signs of wear and tear to see if that is the problem.

Consider a new chainsaw if your chainsaw is more than a few years old, rather of spending money on replacement parts.

Be Careful While Handling Repairs

When repairing a chainsaw, use caution and always wear gloves. Take the proper measures if you don’t want to injure yourself. In order to perform even simple tasks like repairing the starter rope, one must wear gloves.

To avoid cutting yourself or injuring your hands when you’re working on something, wear gloves.

Make sure you take your time and make sensible judgments when you’re repairing a chainsaw on your own. If you try to move too quickly, you’ll make mistakes and be more likely to be wounded.

One of the most risky parts of chainsaw maintenance is mending it. Because of the constant stress on the rewind spring’s edges, you could easily damage yourself by accident.

Related Article: What chainsaws do professional loggers use?

Detaching the pulley will require extreme caution when it is time to replace the system. If you separate the pulley too quickly or carelessly, you risk injury and a trip to the hospital.

Repairing a chainsaw can be quite dangerous, so give it your undivided attention. You can always hire a professional to do these repairs if you don’t feel comfortable taking on the task yourself.

Storing Your Chainsaw

Chainsaw Hard To Pull

One of the most common causes of serious problems with chainsaws is improper storage. The chainsaw will rust if you store it in an area that isn’t ideal for it, and sections of the chainsaw may become clogged up as a result.

Keeping chainsaws in a dry, well-ventilated area is essential to their long life. Keeping your chainsaw in a garage or shed where it’s likely to be exposed to dampness is essential.

In order to keep your chainsaw in good condition, it is important to keep it dry. Chainsaw oxidation is inevitable, however it can be slowed down by properly keeping the tool.

The chainsaw should be kept out of direct sunlight as much as possible, as this might speed up the oxidation process.

For the most part, you’ll want to keep your chainsaw in a dark, dry location like a shed or garage. Never store your chainsaw on concrete, however.

You should hang your chainsaw somewhere out of the way so that it isn’t exposed to damp or sunlight. You may already have shelves in your garage or shed that works well, but if you’re determined, you may make your own.

Related Article: How to store a chainsaw correctly…and leak free!

A lot of individuals even go so far as to hang their chainsaws in a cabinet. You could use something like that if you have the space, and it would be ideal for what you’re attempting to accomplish here.

It’s also a good idea to prevent the chainsaw from becoming caked in dust. There are a few things you can do to make sure you don’t run into any problems with your tools.

Before putting your chainsaw away for the winter, make sure to drain the fuel tank completely. If you have a gas chainsaw, this implies letting the chainsaw run until the fuel tank is completely empty before shutting it down.

To properly clean and spray the chain and guide bar, you’ll need to disassemble the chainsaw. A protective oil must be sprayed on these parts to ensure the chainsaw lasts a long time, and this is done to safeguard the chainsaw.

Final Thoughts

You should be able to figure out what’s wrong with your chainsaw now that you’ve learned more about them. Chainsaws can become difficult to pull for a variety of reasons, but these can be remedied over time.

The chainsaw may become difficult to use as it ages, but it may not always be the wisest idea to keep trying the chainsaw repair process. If a chainsaw has been in use for more than ten years, it’s likely to be rusted and in need for repair.

Even yet, repairing a chainsaw can be a long-term project. If you have a problem with your chainsaw, you’re not alone. Many individuals do the same, and you can do the same if you prefer.

Examining the chainsaw and observing what happens when the pulley system is used will help you determine what’s wrong with your chainsaw. In some cases, finding out what’s wrong may be as simple as looking at what’s going on.

Chainsaws are dangerous and should be stored in a safe and secure manner to avoid any accidents. If you keep your chainsaws out of the rain, the sun, and the dust, they are more likely to serve you for a long time.

Now that you’ve read everything, I hope you have all you need to be successful. When something goes wrong with your chainsaw, you may have to repair some of the parts, but if you’re careful, you can still get the job done.

Leave a Reply

Your email address will not be published.