How To Easily Untangle A Chainsaw Chain

One of the main problems that you are likely to face if you have a chainsaw is a tangled chain. This problem mostly occurs when a chainsaw is stored for an extended time.

Having a twisted chain can be frustrating, especially if you want to use it urgently but you don’t know how to untangle it. If the chain of your chainsaw has tangled and you are wondering what to do, then you have come to the right place.

In this article, we will give you simple tips on how to untangle a chainsaw chain.


How to easily untangle a chainsaw chain – step by step

  • Step 1: Find a good working space
    The first important step to untangling your chainsaw chain is finding a good working place. This task requires a lot of concentration and precision and that is why it is important to find a good working space to make the entire process easy and seamless.
    Choose a working spot that is flat and clean to prevent dust, dirt, and debris from finding their way into your chainsaw.

  • Step 2: Remove the tangled chain from the chainsaw
    Once you find a good working space, the next step is removing the tangled chain from the chainsaw. Some of the tools you need to have to make this process simple include a wrench, plier, and screwdriver.
    Gently remove the chain from the chainsaw then place it on a clean flat surface.

  • Step 3: Lubricate the chain
    First, clean the chain to get rid of debris and dirt that could have caused the chain to tangle then apply a suitable lubricant. Lubricating the chain will help loosen up the tangle thus allowing the chain to move freely.
    This step is particularly important for an older chain that has little to no lubrication.

  • Step 4: Create two symmetrical loops
    This is the most crucial step in untangling a chainsaw chain. After lubricating the chain, you need to look for two loops that are opposite to each other. While holding the two loops, try to raise the chain in the air and make sure that the larger loop is hanging beneath.

  • Step 5: Merge the two loops
    Make one big full loop from the two opposite loops. You may have to undo other loops in order to make your two main loops bigger but ensure that you don’t let go of the two bigger loops.
    Continue creating bigger circles from the loops until you finally create one large loop. If you find it hard to create one large loop while holding your two loops in the air, lay them down on a flat table and do it there. Just ensure that you don’t lose track of your two main loops.

  • Step 6: Untangle the chain
    Now at this point, you can untangle the chain. Start by locating the lowest part of the chain. The lowest part of the chain will move away from the loop thus untwisting the chain.
    When untangling the chain, you may end up creating more loops. This should not worry you because it is part of the untangling process. Continue using the loop pairs until the entire chain untangles.
    If this method fails to yield results, focus on one loop at a time. Try to make each loop as big as possible. This process is tedious and may take longer to complete but it is worth it because it will eventually untangle the chain.

Video Tutorial – How to untangle a chainsaw chain

Final thoughts

As discussed above, untangling a chainsaw chain is a simple process that will only take you a few minutes to complete. You only need to have the right tools and follow the simple process given above.

Related Articles:


Leave a Reply

Your email address will not be published. Required fields are marked *